RFID card readers AR-721HV3
AR-721 HV3 125K
Stand-alone Controller/Networking Reader
- 12 numeric keypad, 1 bicolor LED (green and red) and buzzer indicator.
- Bell potput (Optional)
- Support software (701Server 6.22 & 701 Client Ver6.28)
- Unlimited Site Code
- 11 sets of Time Zone
- Different time zone for each user
- Up to 120 holiday that can be set in a year starting from the editing date.
- Keypad will be locked for 30 seconds while continuous error operation.
- Built-in watchdog to prevent the system halting.
- Support door relay Auto-relock Function.
- One RS-485 Port supported for networking (via controller or directory)
- Built-in a reader and an external reader port for exit or antio-pass-back function.
- Support with keypad locks immd &all cards entrance allowance before cards editing finished.
- Control mode, card capacity and card type assignable by user directly.
- Buitl-in a proximity reader, a external wiegand reader port and IC card reader (optional)
- Auto-discriminating between stand-alone & networking system, AR-721H could connect with controller AR-716EV2,AR-716Ei to have multi-door anti-pass back
- Alarm function is available (Tamper, Force entrance, Door open too long)
- Door unlock time setting, latched-on/ latched-off or momentary 0.1-600 seconds.
- Press * + # to lock / unlock keypad.
- Press 0 + # for all cards entrance allowance
- Providing proximity card flash edit mode for easy & quick setting.
- Integrates any brand, any frequency of Wiegand reader with SOYAL or other access
- Built-in open door relay, alarm relay and request to exit button input.
|Access Mode||Card only||Card|
|Card + Code||Card||Card + Code|
|P/N + Code||Code|
|Auto-show Duty time||*||*||*|
|Keep last 1200 transactions||*||*|
(701Server6.22&701 Client Ver6.28)
|11 sets of Time Zone||*||*|
|Different time zone for each user||*||*|
|Voltage Current||10-24VDC/ <3W|
|RF Frequency/Reading range||125KHz / About 15 cm|
|Networking||RS-485, 9600, N,8,1|
|External reader port||Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader|
|Door relay||2A/12VDC N.O./N.C./COM 0.1~600sec./Latch type|
|Alarm relay||Transisyor Output / Serial Output (selective)|
|Tamper switch||External AR-401RO16|
|Serial Port||Limit Switch (From C)|
|Dimension (mm)||ABS / 112(L)*76(W)*25(H)|