ภาษาไทย
EnglishTanabutr FGR006SR
Fingerprint & 13.56MHz
Contactless Smart Card Reader
KEY Features
• 1:1 Verification and 1: N Identification
• Identification Method: by Auto Touch Sensor (optional) : FGR006SRA
• 13.56MHz Contactless Smart Card Reader and Fingerprint Recognition
• ISO14443 type A compatible
• Serial Number Read only
• 1,000 / 2,000 / 4,000 Fingerprint Users
• ID only Function for Fingerprint Unregistrable Person
• Network Communication via RS232 / RS422 / RS485 (Max.255ch),
TCP/IP (External Converter required)
• 34bit Wiegand (default) and ABA Track II (optional) Output Format
• Upload/Download Fingerprint Templates using Notebook
:RS232C Stereo Jack required (optional)
• Fingerprint Register / Reader Mode using Master Card
• Off-line Add / Delete Function using Master Card
• Firmware Upgrade via S/W
• High Protection from Scratch and ESD (Electro Static Discharge)
• High Quality Optical Sensor
• Tamper Switch
• Options: Supervisory Signal, RS232C Stereo Jack
• Compatible Software: STARWATCH DUAL PRO I / II, iTDC PRO I / II
• Compatible Controller: iCON100SR, iTDC-SR
(34bit Wiegand) Third Party Controller
FINGER007SR, FACEO07SR, SR505
Comparison Table
| FGR006SR | Built-in 13.56MHz (4”) Contactless Smart Card Reader |
| Smart only / Fingerprint only / SMART + Fingerprint | |
| FGR006SRA | FGR006SR including Auto Touch Sensor for Identification |
Connect IDTECK Contoller with Fingerprint Reader
Upload/Download Fingerprints using Notebook
Fingerprint Module Specifications
| Resolution | 500dpi |
| Capture Image Size | 356 x 292 pixels |
| Extraction Image Size | 248 x 292 pixels |
| Sensing Area | 12.7mm x 14.9mm |
| Scanner | High Quality Optical Sensor |
| FAR(False Acceptance Ratio) | 0.001% |
| FRR(False Reject Ratio) | 0.1% |
| ESD(Electro Static Discharge) | 15KV |
| Verification Time | Less than 1sec. |
| Identification Time | Less than 2sec. |
Specifications
| Model | FGR006SR | ||
| CPU | 32bit ARM9 and Dual 8bit Microprocessor | ||
| Memory | Fingerprint Module | Program Memory | 128KByte Flash ROM |
| Data Memory | 128KByte / 256KByte / 512KByte Flash Memory | ||
| Controller | Program Memory | 128KByte Flash Memory | |
| Data Memory | 256KByte SRAM (Battery back up) | ||
| Fingerprint User / Event Buffer | 1,000 / 2,000 / 4,000 Fingerprint Users | ||
| Fingerprint Templates Size | 800 Bytes for 2 Fingerprint Templates | ||
| Read Range | ISK50 / IHC80 / IMC135 : Up to 2 inch (5cm) ISC80: Up to 4 inch (10cm) |
||
| Frequency | 13.56MHz | ||
| Reading Time (Card) | 30ms. | ||
| Verification Time | Less than 1sec. | ||
| Identification Time | Less than 2sec. | ||
| Power / Current | DC 12V / Max.350mA | ||
| Communication | RS232 / RS422 / RS485 (Max.255ch), TCP/IP (External LAN Converter required) | ||
| Baud Rate | 9,600bps (default) / 4,800bps, 19,200bps and 38,400bps (selectable) | ||
| Input Port | 2ea (ExTernal LED Control, External Buzzer Control) | ||
| Output Port | 2ea (Error-Output, OK-Output (Open Collector Output)) | ||
| Output Format | 34bit Wiegand (default), ABA Track II (optional) | ||
| LED Indicator / Beeper | 3 Array LED Indicators (Red and Green) / Piezo Buzzer | ||
| OperatingTemperature | Fingerprint Module | -15° to +40°C (+5° to +104°F) | |
| RF Reader | -35° to +65°C (-31° to +149°F) | ||
| Operating Humidity | 10% to 90% relative humidity non-condensing | ||
| Color / Material | Pearl Dark Gray and Light Gray / Polycarbonate | ||
| Dimension (W x H x T) / Weight | 2.6” x 5.1” x 2.0” (66mm x 129mm x 52mm) / 259.5g (0.57lbs) | ||
| Certification | FCC, CE, MIC, RoHS | ||
Connect Third Party Controller with Fingerprint Reader
| Model | FINGER006SR | FGR006SR | |
| Common Features | |||
| Control Door | N/A | N/A | |
| Event Buffer | N/A | N/A | |
| Fingerprint User | 1,000 / 2,000 / 4,000 | 1,000 / 2,000 / 4,000 | |
| Fingerprint Template Size | 800Bytes for 2 Fingerprint Templates | 800Bytes for 2 Fingerprint Templates | |
| External Reader Port for Anti-passback | N/A | N/A | |
| Frequency | 13.56MHz [MIFARE] | 13.56MHz [MIFARE] | |
| Read Range | 4”(10cm) | 4”(10cm) | |
| Communication | RS232 / RS422 / RS485 | RS232 / RS422 / RS485 | |
| TCP / IP (External LAN Converter required) | TCP/IP(External LAN Converter required) | ||
| Unit Address | 256ch | 255ch | |
| Input port | 2ea :Error-Input, OK-Input |
2ea :External LED Control, External Buzzer Control |
|
| Output Port | 2ea :Error-Output, OK-Output |
2ea :Error-Output, OK-Output |
|
| Real Time Clock | Yes | N/A | |
| Time Schedule | Time Code | N/A | N/A |
| Holiday Code | N/A | N/A | |
| Tamper Switch | 2ea | 1ea | |
| LCD | Yes (Character LCD) | N/A | |
| Keypad | Yes (with Back Lighting) | N/A | |
| LED Indicator / Beeper | Yes | Yes | |
| Difference Features | |||
| Authorization Mode | Fingerprint only | Yes | Yes |
| Card only | Yes | Yes | |
| Card + Fingerprint | Yes | Yes | |
| Card + P/W (4digit) | Yes | N/A | |
| Card + P/W (4digit) + Fingerprint | Yes | N/A | |
| PIN only | Yes | N/A | |
| PIN + Fingerprint | Yes | N/A | |
| PIN + P/W (4digit) | Yes | N/A | |
| PIN + P/W (4digit) + Fingerprint | Yes | N/A | |
| Attachment | Size |
|---|---|
| FGR006SR.pdf | 624.69 KB |